Medical Display Supply Chain: Traceability and Change Control
A display module contains a panel made by one company, a driver IC from another, a backlight with LEDs from a third, an adhesive…
Read the noteDisplays for patient monitors, surgical systems, ventilators and diagnostic devices: DICOM and grayscale, IEC 60601-1 and ISO 13485, hygiene and touch.
19 articles in this category.
A display module contains a panel made by one company, a driver IC from another, a backlight with LEDs from a third, an adhesive…
Read the noteA medical display programme follows a defined sequence: agree the specification, verify the supplier's quality system, sample and validate, then produce under documented controls…
Read the noteMedical touchscreens are cleaned with aggressive disinfectants, every day, for years. The engineering question is whether the touch stack survives that life: the cover…
Read the noteTwo standards dominate conversations about medical displays, and they do different jobs. IEC 60601-1 governs the safety of the finished medical electrical equipment; ISO…
Read the noteFlicker is a dimming problem rather than a panel problem, and the two ways of dimming an LED backlight behave differently. This page covers…
Read the noteMedical imaging displays have a requirement that industrial screens rarely face: the image must be trustworthy enough for a clinical decision. Brightness matters, but…
Read the noteMedical touch surfaces: compare antimicrobial glass, AG etching and coatings by how they survive disinfectants, and the evidence to request.
Read the notePrivacy display modules: read the viewing-angle luminance curve, see what a 95% side-view claim means, and what to request before production.
Read the noteWide color gamut medical TFT: start from a 1280 x 800 platform, then specify gamut with measured CIE coordinates, white point and calibration evidence.
Read the note